Receipt Printer Beep Command

General Seup or Installation Help
Post Reply
mblack4d
Member
Member
Posts: 8
Joined: Sat Sep 19, 2015 4:55 pm

Receipt Printer Beep Command

Post by mblack4d »

I have a kitchen printer that is a sort of Off-Brand Printer. In windows it allows me to set it to beep before and after form print. However it does not beep when a command is sent through POS Pizza. I've done everything I can think of. The printer does beep when I print test pages from Windows so I know it works and is able. Is there a beep command I need to add to the Lines in POS Pizza? Thanks in Advance
User avatar
Scott
Site Admin
Site Admin
Posts: 2566
Joined: Wed Apr 16, 2003 5:35 pm
Location: Western PA

Re: Receipt Printer Beep Command

Post by Scott »

If it can do an ASCII beep, you can embed {7} in the job begin, or end code. This should work for both POS Pizza 5 and POS Pizza 6.

If you are using v6, you can simply choose one of the printer definitions that end in the + sign, and the currently configured beep should happen, just like on a windows test page. The other print modes (without the + sign) are RAW modes, so the printer is only getting the raw data that POS Pizza is sending to it.

Scott
mblack4d
Member
Member
Posts: 8
Joined: Sat Sep 19, 2015 4:55 pm

Re: Receipt Printer Beep Command

Post by mblack4d »

Awesome I will test this. Thank you
Post Reply