Receipt Printer Adjustments

User-to-User general discussions regarding POS Pizza
Post Reply
robertson.12
Active Member
Active Member
Posts: 47
Joined: Fri Aug 12, 2005 2:49 am
Location: Springfield, Illinois

Receipt Printer Adjustments

Post by robertson.12 »

I need some help. I have no problem printing out customer reciepts, but when I print out paidout slips or time slips, some of the printed data is below the tear bar and to get this printed data I have to press the feed button.

I am using a Star SP200 printer and a Star SP300 printer, does anyone know how I can get all the printed data for paidout slips and time slips above the tear bar?
User avatar
Scott
Site Admin
Site Admin
Posts: 2566
Joined: Wed Apr 16, 2003 5:35 pm
Location: Western PA

Post by Scott »

Go to the printer definitions and add one or more {10} ' s to the "Job End / Cut" section. Each code-10 is a single line feed, so if you needed 3 more lines add {10}{10}{10} to the begining of the job end / cut line.

Scott
robertson.12
Active Member
Active Member
Posts: 47
Joined: Fri Aug 12, 2005 2:49 am
Location: Springfield, Illinois

Thanks It Worked

Post by robertson.12 »

Thanks for the help it works great.
Post Reply